an aluminium engine block from a four-cylinder, cleaned out and left as it is, with a glass top resting on the deck.
the block came out of a scrapyard. it had been sitting outside, so the first job was getting the oil out of it. degreaser, then hot water, then a week of drying, then again, because oil keeps coming back out of an engine for longer than you expect. i left the casting as it was after that. no polishing, no paint, no clear coat. the surface is what the foundry and a couple of hundred thousand kilometers made of it.
what i liked about it is that nobody designed the outside of an engine block to be looked at. every rib, every boss, every number is there because a machine needed it. the x-shaped webbing across the top is stiffening. the numbers on the side are a part code. it reads like a drawing of forces, and it's more interesting than most things drawn to be interesting.
so the work was mostly removal. the head studs came out, the plugs, the brackets, everything that stuck out and made it look like a component instead of an object. what stayed is the shape and the ports.
the glass sits directly on the deck surface, on four clear pads in the head bolt holes, so nothing is fixed and nothing is glued. that also means the glass can come off and the block is a block again. 6 mm, polished edge, cut to the length of the block plus the overhang it needed to not look tight.